IRISH RT
Well-Known Member
Got my Eaton Truetrac centre Delivered this morning , Have Not Ordered any Gears Yet as Im not 100% sure what Brand will bolt up with no clearance issues, Putting 3.9 on it , Any Help Appreciated
I just installed a set of 4:30 from Richmond. You will need to order special bearings from summit RAT-9004. I ordered the RMG-6900601 & RMG-8310311 from summit as well. I also installed the spacer that came in the truetrac kit and set the preload to .010" on the passenger side (I do not have green bearings). I called Eaton and they told me to only use shell spiral or Lucas oil 80/90W and no additives. Sucks because I had just dumped in 4 quarts of valvoline and he told me to drain it out. Truetrac also has a $50 mail in rebate right now. Hope this helps! AndrewGot my Eaton Truetrac centre Delivered this morning , Have Not Ordered any Gears Yet as Im not 100% sure what Brand will bolt up with no clearance issues, Putting 3.9 on it , Any Help Appreciated
Just took mine out off the box no Spacer and Then I seen Made in Taiwan , Is youra a Mopar Rear??????I just installed a set of 4:30 from Richmond. You will need to order special bearings from summit RAT-9004. I ordered the RMG-6900601 & RMG-8310311 from summit as well. I also installed the spacer that came in the truetrac kit and set the preload to .010" on the passenger side (I do not have green bearings). I called Eaton and they told me to only use shell spiral or Lucas oil 80/90W and no additives. Sucks because I had just dumped in 4 quarts of valvoline and he told me to drain it out. Truetrac also has a $50 mail in rebate right now. Hope this helps! Andrew
same hereMy truetrac p/n was DTL-913A572.
yep got green bearingsThe spacer is around 1" or so and is the diameter of the axle. Search truetrac on this sight. You will find similar replys. If you have green bearings that are adjustable, I do not think you need the spacer.