edelbrock STR-14-6

[mauve66]

anybody have a pic of this set up with the carbs and linkage intact??? i've got the intake but the throttlecable/tranny kickdown set up can't be imagined, no extra holes on intake and intake bolts go through the inside of the intake to the head. mine is for a RB motor but if you have a pic of one on a LA at least that would help. thanks

 

[duster340]

i would work someting out using wire and mounting the mounts to the studs that bolt down the carbs would probably work out nicely for litle investment if you just take your time and dont mind fabricating some parts