Fabrication shop

[dartcuda1]

Anyone know of a fabrication shop in or near Pennsylvania

 

[pntastar69]

What type of fab are you looking to have done?

 

[dartcuda1]

What type of fab are you looking to have done?

I need a firewall put between the trunk compartment and the passenger compartment of a 67 barracuda fastback

 

[oldkimmer]

Get a sheet on tin or aluminum and cut it too fit. Do a cardboard cut out of it first. Then trace it on to ur metal. Kim

 

[dartcuda1]

Get a sheet on tin or aluminum and cut it too fit. Do a cardboard cut out of it first. Then trace it on to ur metal. Kim

problem is easier said than done I'm no good at that I tried. I'd rather pay someone and just have it done

 

[sireland67]

I think S&W Race cars is in PA. Close to Philly.

 

[dartcuda1]

I think S&W Race cars is in PA. Close to Philly.

s&w race cars is right up the street from me and I've been trying to get my car in there for 2 years

 

[A body]

STR Chassis / Tory Shellhamer in Lebanon PA. He makes a nice tube K set up for A bodies also

 

[pntastar69]

Dartcuda1 - Sent you a pm.

 

[JBurch]

............ Do a cardboard cut out of it first. Then trace it on to ur metal............... Kim

This!!! Cardboard is cheap, you can make a 100 pieces of scrap and not cost much more than your time and the added benefit is you will learn something and that is the core of Hot Rodding........

 

[dartcuda1]

This!!! Cardboard is cheap, you can make a 100 pieces of scrap and not cost much more than your time and the added benefit is you will learn something and that is the core of Hot Rodding........

I understand what you're saying been through that frustration went through the roof because it's not my forte it'll be easier faster to pay somebody and have it done in a day than me taking the year to do it