amoparacer
Well-Known Member
Okay so remove screws from outer ring. What the hell with the filler neck. Removed rubber floor seal screws pulled filler neck out of grommet calling it a grommet is very suspect. Ewwwww nice shape. What the hell filler neck was hacked by Mr Corn Hole to run leaded fuel check you out Mr fabricator.
Okay so i have found the big leak. Can you believe it he hacked off a neck with no down size for unleaded fuel. Then went to a muffler shop with the long end and had it enlarged and just slid in the filler end no welding nessasary.
So 2 hour latter and 2 hours of welding grinding fitting there you go air tight looks good.
No wonder he never registered the car just left it non opted .
Tuesday morning is off to the smog test parying it passes
Okay so i have found the big leak. Can you believe it he hacked off a neck with no down size for unleaded fuel. Then went to a muffler shop with the long end and had it enlarged and just slid in the filler end no welding nessasary.
So 2 hour latter and 2 hours of welding grinding fitting there you go air tight looks good.
No wonder he never registered the car just left it non opted .
Tuesday morning is off to the smog test parying it passes