Fiberglass Replacement Hoods

[340_dart_power]

Anyone familiar with this company, or have other suggestions?

http://www.andysautosport.com/dodge/1970_1976_dart/exterior/hoods/fiberglass_hoods/us_body_source/

 

[ocdart]

Prices listed are 15% higher than buying direct. Check out his source for these hoods at
http://usbodysource.com/

 

[412 Stroker]

Why not try AAR Fiberglass??? got my scoop from them, love it.
http://www.aarqualityfiberglass.com/cart2/?cPath=

 

[340_dart_power]

Both great ideas, thanks guys.

 

[sscuda]

Anyone familiar with this company, or have other suggestions?

http://www.andysautosport.com/dodge/1970_1976_dart/exterior/hoods/fiberglass_hoods/us_body_source/

340,

AAR produces a great product.

Glasstek isn't to bad either.

Sled City make good race weight glass body panels

I hope this helps.

sscuda
8)

 

[inkjunkie]

I have a USBodySource hood, the one with the inner structure so you can hinge it. The frame of it was 3/8" off center which made it necessary to get creative in mounting it. Body guy made a small shim that he welded to one of the hinges and then had to tweak both of them. And where the scoop is molded to the hood cracked (it is a Hemi style hood). The way it was formed it will be difficult if not impossible to use the small support bars that you see on most Hemi style hoods.....

 

[swisswill]

Glasstek builds a good hood. That's what mine is, half of it anyway.

 

[JRDART]

AAS was who I went through to build my 280zx but as far as muscle cars go Their cheaply made and overpriced on the "good" parts.

 

[vitamindart]

i bought a hood a long time ago from unlimited / up22 and the fitment was terrible
spend a couple extra bucks and get a good one from AAR unless you like working with fiberglass....Yuck!

 

[dodgedifferent2]

i just picked one up from pentastar reproductions.