.040 over 440 for 448ci,
10.6:1 running on 91 octane
950 Quick Fuel
Edelbrock RPM Performer
Victor cylinder heads that flow like the OOTB Quick Fuel 240 CNC heads
Custom Comp Cams solid flat tappet, idles at 750-800 rpm
Hughes Engines 1.6 rocker arms
Scat rods
SRP flat top pistons
Stock forged crankshaft
572 lb-ft @ 3,800 rpm and 593 hp @ 5,900 rpm
Start of dyno pull @ 3,000 rpm = 492 lb-ft
End of dyno pull @ 6,100 rpm = 496 lb-ft
Should make an A-body run pretty good but I hear it is going into a 1972 Satellite.
10.6:1 running on 91 octane
950 Quick Fuel
Edelbrock RPM Performer
Victor cylinder heads that flow like the OOTB Quick Fuel 240 CNC heads
Custom Comp Cams solid flat tappet, idles at 750-800 rpm
Hughes Engines 1.6 rocker arms
Scat rods
SRP flat top pistons
Stock forged crankshaft
572 lb-ft @ 3,800 rpm and 593 hp @ 5,900 rpm
Start of dyno pull @ 3,000 rpm = 492 lb-ft
End of dyno pull @ 6,100 rpm = 496 lb-ft
Should make an A-body run pretty good but I hear it is going into a 1972 Satellite.