733404spdCuda
Well-Known Member
Contact seller
I had this motor built for my Cuda and it's too much motor for the car. Although its very street / pump-gas friendly the power is too much for my tire / suspension and I don't want start playing with it. I have almost $10K into the motor, looking to get $7500
The motor is still in the car and can here run, only 300 street miles.
340 Block 4.100"
3.58 Eagle Forged Crank
2.100 Eagle sbc H Beam rods
Diamond Piston 9.7 comp
Edelbrock 63CC Heads CNC ported by Modern Cylinder Heads
Houghs 1.6 roller rockers
Solid 243/251 duration @ .050" .550/.570 lift
Edelbrock RPM Intake
Kevco pan with baffles
750 quickfuel carb
Heads flowed the following numbers:
.500 - 275/215
.550 - 284/224
.600 - 292/230
.700 - 294/244
520HP @ 6200 and 490TQ @4500.
The motor is still in the car and can here run, only 300 street miles.
340 Block 4.100"
3.58 Eagle Forged Crank
2.100 Eagle sbc H Beam rods
Diamond Piston 9.7 comp
Edelbrock 63CC Heads CNC ported by Modern Cylinder Heads
Houghs 1.6 roller rockers
Solid 243/251 duration @ .050" .550/.570 lift
Edelbrock RPM Intake
Kevco pan with baffles
750 quickfuel carb
Heads flowed the following numbers:
.500 - 275/215
.550 - 284/224
.600 - 292/230
.700 - 294/244
520HP @ 6200 and 490TQ @4500.