Front End 66 Cuda

-
tony20110

tony20110

Well-Known Member
Joined
May 14, 2013
Messages
219
Reaction score
9
Location
Manassas Va
I'm doing a engine swap and decided to replace the front end while I have the engine out. Does anyone have a recommendation for a company that offers a good kit? I'm putting in a 360. Any advice would be appreciated. Thanks!
 
Are you talking about rebuilding the front suspension? If so Moog (part by part) or PST is a good why to go. Now would be a good time to upgrade to disc brake setup either sbp K/H or bbp 73+ setup which can easily up the 11.75 rotors but the 11.75 need at least 15" wheels.
 
Thanks! I should have been clearer. Yes I'm replacing the suspension. I looked at PST but wasn't sure which kit to buy. I have a disc brake set up from a 73 already that I'm told should fit. I'm a newbie so I'm learning as I go.
 
Because you are using the 73+ disc setup (big bolt joints), you might wanna call them and get it setup.
 
You must log in or register to reply here.
-

Back
Top