Front wheel bearing covers for a 1964 Dodge Dart GT convertible

[poohbear]

Need help on locating the front wheel bearing covers. Purchased the car and the previous owner put new brakes and bearings in and left the dust covers off. Any suggestions on where to purchase these items would be greatly appreciated. I measured the diameter of the bearing housing 1 1/2 diameter depth from seat to end cap needs to be 1 1/8. I hope these are correct on measurements. Thanks in advance to any suggestions would be grateful.

 

[toolmanmike]

Need help on locating the front wheel bearing covers. Purchased the car and the previous owner put new brakes and bearings in and left the dust covers off. Any suggestions on where to purchase these items would be greatly appreciated. I measured the diameter of the bearing housing 1 1/2 diameter depth from seat to end cap needs to be 1 1/8. I hope these are correct on measurements. Thanks in advance to any suggestions would be grateful.

A Parts Wanted ad would be your best bet.

 

[toolmanmike]

9" brakes? Here's one for 10" brakes. Front Wheel Bearing Dust Caps 1964-72 Exc 9" Brakes, Front Wheel Dust Caps, 101-DC3416PR Reproduction, NOS and Used Mopar Muscle Car Parts

 

[Dana67Dart]

I put this together, I was looking for caps for 67 dart with front disk. It might help?

10" Drum / Disk Dust Cap Product Review

 

[cudamark]

The 9" brakes grease cap is unique to those. Look for some used ones.