Fuel line connection 6an thread to 5 /16

-

fulltank

Well-Known Member
Joined
Sep 23, 2008
Messages
76
Reaction score
8
Location
Burnaby BC
I'm just wrapping up my 2 barrel to 4 barrel conversion on a 73 318.
I got a Edlebrock AVS 2. (fired up right away)

I'm looking for suggestions on a good fuel line connection as the edelbrock line is a 6an thread and the dart fuel line is 5/16 the dodge threads are a smaller diameter


Thanks

20240522_125152.jpg
 
Edelbrock carburetors don't have NPT or AN threads. They have straight bolt threads, as in tube and flare. I cannot remember the exact size, but I THINK it's 5/8 - 18. I hard line all of mine, so I always find a male tube thread to "whatever" size female inverted flare line I am running. You can get hose barb fittings too.
 
In the carb installation book they say
Use 8134 chrome fuel line. (I did)
It says it has a 6 an thread on it.
I contacted edlebrock and they say they have a 6 an to 3/8 adapter but they don't have a 5/16 connection.
 
In the carb installation book they say
Use 8134 chrome fuel line. (I did)
It says it has a 6 an thread on it.
I contacted edlebrock and they say they have a 6 an to 3/8 adapter but they don't have a 5/16 connection.
Click on my links. There’s both male and female adapters to go to 5/16.
 
It's amazing (and awesome) that there are adapters available for just about anything anymore.
 
-
Back
Top