Hi Guys,
I am trying to sort out a problem I am having with a fresh build.
I have a TF3 valvebody in a 904 - Have used it for years with no problems. Kickdown Wired Back as per Transgo and Mr. Shifts' instructions.
I recently Rebuilt the trans with all aluminum Drums and Full Roller Kit.
Now when I Shift into D/ High Gear it "hunts around" and will randomly downshift to 2nd - This should not happen with a full manual Valve body.
I adjusted and Verified shifter cable position - that is correct.
This one has me stumped - Any Help would be appreciated.
Greg
I am trying to sort out a problem I am having with a fresh build.
I have a TF3 valvebody in a 904 - Have used it for years with no problems. Kickdown Wired Back as per Transgo and Mr. Shifts' instructions.
I recently Rebuilt the trans with all aluminum Drums and Full Roller Kit.
Now when I Shift into D/ High Gear it "hunts around" and will randomly downshift to 2nd - This should not happen with a full manual Valve body.
I adjusted and Verified shifter cable position - that is correct.
This one has me stumped - Any Help would be appreciated.
Greg