old65-4spd
Well-Known Member
Does anyone know a vendor selling a fuse block bus with 3 clips as in pic?
![Fuse Block [back].jpg](https://www.forabodiesonly.com/mopar/attachments/fuse-block-back-jpg.1716265490/ "Fuse Block [back].jpg")
Fuse Block Bus
- Thread starter old65-4spd
- Start date
-
old65-4spd
Well-Known Member
Thanks, but not needed. As noted, only need "bus with 3 clips".
Explanation:
Believe it or not, my original fuse block and fuse clips are in excellent condition. The harness is on the workbench for refurbishing, which is now completed and included a thorough cleaning of the fuse block, fuse clips and female spade terminals and housings. The fuse clips were not corroded as other harnesses I have in my box of spares and also seen at swap meets. Next, is wiring mods that include gauges and tach which will get power from the unused position. Rather than using a single fuse clip and a jumper to the 2-position bus already there, a cleaner mod is to replace the 2-position with a 3-position bus.
Explanation:
Believe it or not, my original fuse block and fuse clips are in excellent condition. The harness is on the workbench for refurbishing, which is now completed and included a thorough cleaning of the fuse block, fuse clips and female spade terminals and housings. The fuse clips were not corroded as other harnesses I have in my box of spares and also seen at swap meets. Next, is wiring mods that include gauges and tach which will get power from the unused position. Rather than using a single fuse clip and a jumper to the 2-position bus already there, a cleaner mod is to replace the 2-position with a 3-position bus.
Mattax
Just the facts, ma'am
No. He doesn't want to do the jumper. The jumper is what the factory did, at least in the 60s, to add power for a tach or an A/C.
www.forabodiesonly.com
www.forabodiesonly.com
Rallye cluster gauge issues - 67 Barracuda
I imagine this topic has been covered many times before, and I suspect I already know where to start looking for my problem, but am looking for some shared wisdom. I did some searching of older threads and found several related posts, but nothing that fits my situation exactly. I apologize in...
www.forabodiesonly.com
Source for new fuse clips?
Anybody have a source for these? I pulled my fuse box because they were all rusted up. After dumping a bunch of stuff in my face because the box didn't have a cover, I cleaned them up. I can definitely still use these, but wasn't sure how quickly they would rust over again since the plating...
www.forabodiesonly.com
Last edited:
old65-4spd
Well-Known Member
Thanks, Mattax. You understand where I’m at as you have added a circuit to the unused position also. I checked your links and went from there and found complete fuse clip replacement kits for various models from AMS Obsolete for $40. I have purchased various parts from them and found them to be a valuable Mopar parts source. I will call them to see if they will sell only the one part I need.
-
Similar threads
