[WANTED] Head Gaskets

-
Status
Not open for further replies.
Measure the combustion chamber on your heads. U may need close to 4.50 bore gasket. U can’t have the fire ring into the combustion chamber. Kim
 
oldkimmer said:
Measure the combustion chamber on your heads. U may need close to 4.50 bore gasket. U can’t have the fire ring into the combustion chamber. Kim
Click to expand...
This is a for a 4.04" bore small block I'm building. 4.125 gasket bore diameter will be plenty. A 4.080 gasket will clear the chambers but there's a slight chamfer left at the top of the bore and maybe a little core shift that puts it to close for my liking.
 
Last edited:
19DUSTER73 said:
This is a for a 4.04" bore small block I'm building. 4.125 gasket bore diameter will be plenty. A 4.080 gasket will clear the chambers but there's a slight chamfer left at the top of the bore and maybe a little core shift that puts it to close for my liking.
Click to expand...
Oh ok, I was thinking your big block, sorry Kim. Maybe I have u confused with another member.
 
Status
Not open for further replies.
-

Back
Top