Heat sinks

[nuttyprof]

I have an assortment of heat sinks if anyone is interested in them for an HEI conversion. Pics below.
The sheet aluminum one has broached bolt holes spaced right for a 4 pin HEI module.

 

[nuttyprof]

More heatsinks. The second heat sink down (4th pic) is also drilled at the right spacing for HEI.

 

[BillGrissom]

Nice offer. I used an old CPU heat sink on my slant HEI setup. I bolted it to the inner fender and put tapped holes in it to hold the module. That way the module can be easily swapped on the road if it fails. I still have a piece if I ever do another HEI.

 

[Rice Nuker]

''

 

[nuttyprof]

Make offer. I got them just for pulling them. Not looking to make of money but would not mind getting a little bit.

 

[Rice Nuker]

10 dollars each + shipping.

 

[nuttyprof]

Where do I send them and what heat sink(s) do you want?

 

[Rice Nuker]

I'll send you a PM
Thank you

 

[Rice Nuker]

nutty, these are the two units I am interested in.

Thankyou

 

[nuttyprof]

They will be on there way in the next few days.

 

[Rice Nuker]

Great, thanks nuttyprof!

They will be on there way in the next few days.

 

[Rice Nuker]

Heat sinks are great! Thanks!
.

 

[nuttyprof]

If anyone else needs one I still have several.

 

[nuttyprof]

I still have a bunch of these. Make offer, not looking for much more than shipping.

 

[nuttyprof]

bump

 

[KitCarlson]

The one 17 down from the top looks good for for my COP ignition. It is a rail with several clips. How many can you supply? The plan is to use one for 4 and 6 cylinder engines, and two for V8, one on each bank.

 

[TrailBeast]

That is a nice offer, and I hope people realize those are MAJOR overkill for HEI modules.
Keep in mind that the modules ran in 200+ degree distributors so any environment temp less than that is plenty safe for them.

 

[nuttyprof]

The one 17 down from the top looks good for for my COP ignition. It is a rail with several clips. How many can you supply? The plan is to use one for 4 and 6 cylinder engines, and two for V8, one on each bank.

Probably more than half a dozen. I do not get a lot of them but I grab them when I can. Number 16 is an end view of the same peice.

 

[nuttyprof]

Are you still interested KitCarlson?