Help finish my 414 stroker

[rscottick]

So My longblock is an early 70's 360 .030 over. compression at zero deck with eddy heads is at 11.9-1 260/266 duration and .558/.555 list solid cam.

trans is 727 with full manual reverse valve body pro bullet proof build 3500 stall convertor

rear is an 8 3/4 with 4.10's

need suggestions on finishing the top end or swapping heads and the rest of the build.

how well do you think she will run and hp/torque estimates

 

[clinteg]

What do you want to achieve out of the combo?

 

[gregsdart]

You could use a lot more stall. My guess is 5000 for a strip only.

 

[B3422w5]

Run a big carb. 950 at least. Assuming you are going to race it
Single plane intake .... victor...
More convertor. Probably something flashing 5-5300 rpm
That 3500 convertor will kill it
Port the heads. They are already gonna be small on a stroker
With this stuff done, car should run 10.50’s- 10.80’s depending on weight of car. I am being fairly conservative