help me choose my piston

[USCG CHARGER]

The pistons that I have are the Wiseco forged flat tops

4.060" 3.580" 6.123" 1.665 -6cc 10.0:1

http://store.summitracing.com/partdetail.asp?part=WIS-PT022H6&autoview=sku

 

[USCG CHARGER]

does anyone know anything about these pistons?

 

[fishy68]

does anyone know anything about these pistons?

Wiseco makes darn good pistons. Only 2 things you have to watch out for is getting the right rings. They take 1/16 compression rings which are a standard high perf. ring but the stock 360 rings are 5/64 so if you order a kit make sure and get the right rings. And they don't have valve reliefs cut in them. You have to either make sure and not go too big on the cam or the valves will hit the pistons.

Looks like compression ratio is right where you wanted it too. That's good.

 

[Thrashard340]

I have KB107's in my 360 w/.060 overbore and stock chambered x heads about 9.7:1 compression.

 

[USCG CHARGER]

I have KB107's in my 360 w/.060 overbore and stock chambered x heads about 9.7:1 compression.

what yr block do u have? Do you have any probls w/cyl flex or running hot?

Jason