PanGasket
has cork sides
these are the numbers off the pad
someone please help!!
5K 360 8690 1
149005
137
2
someone please help!!
5K 360 8690 1
149005
137
2
Help me identify what year 360 this is?
- Thread starter PanGasket
- Start date
-
valentek
69 Barracuda
It looks to be an 84 block, if I am reading the 10k day calendar correctly.
If you look on the side of the block, there should be a date and a clock cast into the block.
Here is a 94 Magnum that shows it on the passenger side, but I think the earlier blocks had it on the driver side.
http://www.netwalk.com/~ericv/images/408_stroker/pages/engine_bd1 019_jpg.htm
If you look on the side of the block, there should be a date and a clock cast into the block.
Here is a 94 Magnum that shows it on the passenger side, but I think the earlier blocks had it on the driver side.
http://www.netwalk.com/~ericv/images/408_stroker/pages/engine_bd1 019_jpg.htm
PanGasket
has cork sides
0?
Its on the drivers side. And I dont think is a magnum. Is '84 a good year for the 36
greenhornet
Well-Known Member
2/1/85
It was a factory 4 barrel 360, It had a quadrajet on it, out of a 3/4 ton or larger van, the oil pan looks huge on it... I didn't get that info from the numbers, I pulled that 360 before we crushed the van... ;)
It was a factory 4 barrel 360, It had a quadrajet on it, out of a 3/4 ton or larger van, the oil pan looks huge on it... I didn't get that info from the numbers, I pulled that 360 before we crushed the van... ;)
PanGasket
has cork sides
hahah, i just didn't know if you knew. It looks excellent. Thanks again! I owe ya one
greenhornet
Well-Known Member
You might could search and see what Dodge put in their heavy duty vans in '85... I don't remember what the breather looked like, all I remember is the tranny was bad, dropped the 360 out from the bottom and that the van barely fit in our crusher...
PanGasket
has cork sides
1985 Dodge B250/350 van. 360ci V8 rated at 155hp. Odd
greenhornet
Well-Known Member
Find out the torque numbers, torque is what hauls your azz... Olds and buick used to rate their big blocks at like 310 hp but their torque numbers were like around 500 plus...
PanGasket
has cork sides
360 4 160 @ 3600 rpm 265 @ 1600
265 ft/lbs torque @ 1600 rpm
-
