Hemi 90 degree oil filter adapter

[Ozyduster]

Anyone running the 90 degree oil filter adapter with the hemi. Does the adapter and filter clear the K frame etc?
If so does it have much clearance as i need 10mm to the k frame for engineering reasons. The 90 degree adapters are not cheap however i want to avoid a oil filter relocate kit as think they are messy

 

[BP27]

It does with the Holley motor mounts

 

[BP27]

It is only 7mm

 

[Ozyduster]

It is only 7mm

View attachment 1716476489

Legend appreciate the pics as i also the holley mounts! Ill send these to the engineer and see what he says. See you also running the firm feel K frame braces! Good bit of kit

 

[mopar65]

It does with the Holley motor mounts

View attachment 1716476475

I hope it fits with the TTI motor mounts

 

[Ozyduster]

I hope it fits with the TTI motor mounts

It should as the holley only brings motor forward i would think its the same height

 

[mopar65]

It should as the holley only brings motor forward i would think its the same height

Do you know what size and how long the mounting bolts for the adapter are? Mine didn't come with any bolts or the oil filter threaded adapter

 

[Ozyduster]

Do you know what size and how long the mounting bolts for the adapter are? Mine didn't come with any bolts or the oil filter threaded adapter

I have not purchased one yet as wanted to know it works lol as they are not cheap but dont like the oil filter relocate idea

 

[mopar65]

I have not purchased one yet as wanted to know it works lol as they are not cheap but dont like the oil filter relocate idea

Oh sorry I thought you bought one already. I found one about $100 cheaper than going through Bouchillon performance . But mine didn't come with the mounting bolts or the oil filter threaded adapter.

 

[Kiddart1]

I hope it fits with the TTI motor mounts

i haven't put a filter on mine but it does look like it clears with the TTI mounts

 

[Kiddart1]

Anyone running the 90 degree oil filter adapter with the hemi. Does the adapter and filter clear the K frame etc?
If so does it have much clearance as i need 10mm to the k frame for engineering reasons. The 90 degree adapters are not cheap however i want to avoid a oil filter relocate kit as think they are messy
View attachment 1716476402

the only thing that might give you fits is the sensor on the back of the unit. might have to plug and move to a different location.

 

[mopar65]

the only thing that might give you fits is the sensor on the back of the unit. might have to plug and move to a different location.

The one I bought came with the plug already installed

 

[Ozyduster]

Anyone used the bouchillion unit as looks to have a smaller 90 degree bend and a longer arm so pushes filter further away from k frame. Not cheap tho

 

[AUSA66]

They (Mopar) do supply a minature oil filter i have been running 1 for 1,000 km without any problems

 

[Ozyduster]

They (Mopar) do supply a minature oil filter i have been running 1 for 1,000 km without any problems

Is it shorter or narrower?

 

[AUSA66]

Both

 

[Ozyduster]

They (Mopar) do supply a minature oil filter i have been running 1 for 1,000 km without any problems

Do you know the part code or what car and set up its for?

 

[AUSA66]

72 b body about 15mm clearance with a normal filter it touches