[WANTED] holding pin for 8 3/4 cone style rearend

[winstoninwisc]

I need a pin from the center cone section of a 8 3/4 rear end if you have a blown rearend
or a pin from an open rearend . open to suggestions here also as long as it will be strong . please help if you can thanks ,,,Jon

 

[mopar373]

There are many different lock pins. If you have a pic of the one that you need I have an assortment of them.

 

[SGBARRACUDA]

You can use a roller bearing from a bearing warehouse. It needs to be .250 x 1" long

 

[AJ/FormS]

You dont say if you lost it or if it broke. If it broke in service, you need to figure out why.