Swingerdude
Member
Hi there.
I have just installed a Holley 650 DP on a 360 mopar with an Eddy RPM intake. 727, 8 3/4.
Before that, i was running an Eddy 600 vac.sec. (which is now sold)
When i put the pedal to the floor, the carb's primaries are open, but the secondaries are just about to. When pulling the throttle manually with my hand, it opens fully. Looks like the cable can't move far enough to pull the throttle all the way back.
It's a stock cable and kickdown linkage.
I've installed the chrysler adapter on the carb.
Any ideas and help is very welcome...
I have just installed a Holley 650 DP on a 360 mopar with an Eddy RPM intake. 727, 8 3/4.
Before that, i was running an Eddy 600 vac.sec. (which is now sold)
When i put the pedal to the floor, the carb's primaries are open, but the secondaries are just about to. When pulling the throttle manually with my hand, it opens fully. Looks like the cable can't move far enough to pull the throttle all the way back.
It's a stock cable and kickdown linkage.
I've installed the chrysler adapter on the carb.
Any ideas and help is very welcome...