Deleted Member
Well-Known Member
- Joined
- May 20, 2019
- Messages
- 265
- Reaction score
- 57
After rebuilding my 1920 I've noticed that immediately off idle when pressing the pedal The car slightly hesitates.
After checking the carb for vacuum leaks I noticed that when I hit the accelerator the pump shot is kind of weak. Weaker than before I rebuilt it. I didn't pull the lead plugs from the metering block just blew it out with carb cleaner and compressed air.
What could cause this issue ?
My thoughts:
Bad diaphragm (new)
Incorrect float level
Issue with checkball? I don't know how it functions
Clogged shot port ?
After checking the carb for vacuum leaks I noticed that when I hit the accelerator the pump shot is kind of weak. Weaker than before I rebuilt it. I didn't pull the lead plugs from the metering block just blew it out with carb cleaner and compressed air.
What could cause this issue ?
My thoughts:
Bad diaphragm (new)
Incorrect float level
Issue with checkball? I don't know how it functions
Clogged shot port ?