ryan1964
Well-Known Member
On one side of the top it has L 80186 and below it it has 2928 the other side its stamped 12R-8795B any help would be great
I need help identifying the cfm of this carburetor
- Thread starter ryan1964
- Start date
-
It appears to be one of the tiny Holley Dominator
that was 750 CFM rather than 1050 to 1250 like
its big brother.
Great for someone for a show car that wants the appearance
of a Dominator without the CFM and issues that the big ones have.
that was 750 CFM rather than 1050 to 1250 like
its big brother.
Great for someone for a show car that wants the appearance
of a Dominator without the CFM and issues that the big ones have.
ryan1964
Well-Known Member
Ok thank you
Did not finish my post and premature posting.
Please see it now.
Please see it now.
What numbers are on the driver's side of the main body?
ryan1964
Well-Known Member
1480 on the throttle lever that's it
Nothing AT ALL on the main body? That's really strange. That's normally where the dominator list number is.
L 80186 is the list number.
I can tell size by venturis and throttle blades
size.
I can tell size by venturis and throttle blades
size.
ryan1964
Well-Known Member
This number on the bottom of it 87955
I agree they look tiny for a dominator.
ryan1964
Well-Known Member
ryan1964
Well-Known Member
I was told it was a 750 when I bought it after looking at pictures on line and trying to cross the numbers I couldn't find anything! But I knew I could find the answer here thank you guy's
Demon499
Well-Known Member
This is a 750. I owe one but I have changed the boosters for more cfm. You can see the difference of them in the picture.
Ted
Ted
mopowers
Well-Known Member
According to the link above (and the Holley numerical list), those little 750 dominators have huge venturi and throttle bores (1-11/16 and 2"). That can't be right, can it? That's the same size as the 1050 dominators if I recall.
ryan1964
Well-Known Member
Sure does
-
