Installing boots on my Accel wires.

[Snake]

Ok just got my new 8mm Accel wires.Thease are the ones that I have to make my own ends at the cap.Ok looks like its going to be a tight fit sliding the wire into the boot.What could I use to aid the wire sliding in with out hurting the wire it self.In the past I bought 7mm a tad tight but slid on with no grease or anything.Thanks in advance.Don:toothy10:

 

[Badart]

I justed used some dielectric grease. Worked great.

 

[Snake]

There is some that came with the wires,anything else guys.Thanksss Badart.

 

[green1]

Slick stuff, from hardware store. Easy, if you get it on your hand, you can't hold on to the wire.

 

[ram250098]

Use the stuff that came with it..it is a dielectric gel and works very well, you don't need a whole lot jusy spread it on with your finger.
AL

 

[340mopar]

Silicone spray lube


Chuck

 

[dodgefreak73]

Silicone spray lube


Chuck

X2 This is what I've used and it works great!

 

[Snake]

Thanksss for the tips guys.I used cam break in man slid on like nothing.

 

[65Vart]

sSSnake, I used the stuff supplied with the Taylors, had no problems.

 

[Snake]

sSSnake, I used the stuff supplied with the Taylors, had no problems.

Cool glad it work for ya,gosh when I first tryed the dry way no go,all is good now just have to cut and clamp tonight.PS its to dam hot here thatsss why I have stalled on installing them lol.