INTERIOR TURN SIGNAL INDICATORS

[WAYNE0]

I took out the factory gauge cluster and made my own with after market gauges. I would like to install some sort of turn signal indicator lights. The factory wire harness is still there. Does anyone know what wires to tap into ?

 

[Car Nut]

What kind of car?

 

[65 Dartman]

What year?

 

[4spdragtop]

Get a factory schematic. It's a must for these old dinosaurs

 

[j_anderson]

I just put in some aftermarket gauges from NVU. They had the turn signal and brights indicator already built in to the Speedometer but I also wanted to have a warning light for the brakes and seatbelt indicator. I just wanted all functions that are there to be wired and working.

I used these that I picked up on amazon.

I need to straighten the brake warning light but I need to pull out the cluster when my new bezel gets back from the plastic chrome shop.

The chassis service manuals over on mymopar have an electrical chapter with detailed wiring schematics.

 

[WAYNE0]

O sorry 67 barracuda

 

[67Dart273]

O sorry 67 barracuda

Go to mymopar.com. There are aftermarket wiring diagrams as well as factory manuals. There MAY NOT be the proper "addition"for the Barracuda special wiring, but the wire colors are essentially the same. The wire colors for the indicator lamps are the same as the front turn signals.

 

[WAYNE0]

Go to mymopar.com. There are aftermarket wiring diagrams as well as factory manuals. There MAY NOT be the proper "addition"for the Barracuda special wiring, but the wire colors are essentially the same. The wire colors for the indicator lamps are the same as the front turn signals.

ok awesome thank you