Is this correct?

[Stroked68Dart]

Are these vacuum lines connected correctly? I have a Mopar Performance vacuum advance distributor, a Holley 4160 single pumper with vacum secondaries and electric choke. There is one vacuum line that goes from carb plate to both the choke and to the distributor via a T connector. Please see below photos and let me know if this is correct.

Thanks in advance.
Bill

 

[805moparkid]

no the carb needs to be from the float bowl... (the black cap)

 

[70aarcuda]

where the black cap on the carb metering block is...that hooks to the distributor's vacum advance....then plug the others...