Is this what I need?

[Coyote Jack]

I have been searching everywhere for steel braided and AN fittings. Summit appears to have the best prices. I am not to good with figuring out the types of threads used on these cars.

I am running -6 AN lines.

Is this the fitting I need to connect to the OEM brass fitting at the tranny and the radiator?
http://store.summitracing.com/partd...art=SUM-2200075&N=700+400304+115&autoview=sku

Jack

 

[ocdart]

Is this the fitting I need to connect to the OEM brass fitting at the tranny and the radiator?
http://store.summitracing.com/partd...art=SUM-2200075&N=700+400304+115&autoview=sku

Jack

Jack, those won't connect direct to the brass fittings on the trans and the radiator. Those are meant to connect to a hard line by means of a compression sleeve - you'd need to cut the existing hard line and then use these to connect your braided line to the hard line stubs.

 

[Eric_S68]

Wrong part Jack, that one is for a hard line! On the radiator end though you'll need another 2 fittings to go between the new hose end and rad.


For the rad times 2

http://store.summitracing.com/partd...=SUM-220648&N=700+4294849624+115&autoview=sku

The cheapest hose

20 feet http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM-230620&N=700+115&autoview=sku

For the Hose Ends times 4

http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM-230620&N=700+115&autoview=sku

Greif relief LOL

http://store.summitracing.com/partdetail.asp?part=EAR-184004ERL

That will get you all set for the cheapest prices that I know of.

:cheers: Eric