K-member Bolts what to torque too?

[MonkeyMadness]

Sitting in my garage and have the old K-member out and new one is in place and bolts in place. Then relized i have no clue what they should be torqued too.
Little help please....

Pictures for fun...

 

[dodge71demon]

If you really want to torque them it will be listed by the bolt size

 

[SGBARRACUDA]

Torque value for K member bolts

 

[zkx14]

150

 

[famous bob]

150

View attachment 1715444797

Tite as u can get them with a 1/2" break over .

 

[zkx14]

Tite as u can get them with a 1/2" break over .

Pretty much...LOL. I think the scale on my 1/2inch torque wrench stops at 120. So I ran them to that and then gave em some more with breaker bar.

 

[Ager]

150lbs for k-member

 

[MonkeyMadness]

All the torques have been applied, thank you gentlemen!

 

[RustyRatRod]

Blue locktite and Ingersol Rand.

 

[kursplat]

may i add, YE HAW!

 

[thesiren74]

Is that on an original beer keg magnum manifold?

 

[R4Sedan]

Sitting in my garage and have the old K-member out and new one is in place and bolts in place. Then relized i have no clue what they should be torqued too.
Little help please....

Pictures for fun...
View attachment 1715444781 View attachment 1715444782 View attachment 1715444783 View attachment 1715444784

That's a pretty Engine.

 

[Stephen Mulkey]

View attachment 1715444888
may i add, YE HAW!

My goodness that's a beautiful example of an a body engine

 

[MonkeyMadness]

View attachment 1715444888
may i add, YE HAW!

YES!

Is that on an original beer keg magnum manifold?

Yes sir! Heavily modified...