GTXperience
Orig Stealth Mod
Is anyone running this pan on their 408? I am looking for some real world feedback (ie. clearance issues, etc.) on it. One of our members is selling one and I am considering picking it up.
I am using one on my 408. I haven't fired the engine yet but it is in the car. It fits very nicely, no k member clearance issues. I have tti headers installed with no clearance issues either. Kevco sells a nice oil pickup tube for this pan that bolts to the #3 main cap bolt.
No windage tray, I've heard that they are not that benificial with the deeper pans. And I will send you a picture of the pickup when it arrives. And again if you want any measurements let me know via PM. I might end up doing it anyway so I have it for future reference.
Eric
Yes, I am running a stroker (408). I used the Eagle SIR I beam rods. They have the arp cap bolts. These give a little more clearance. Didn't need to notch the block at all.
Steve
djwhog, do you have any pics of the mods you had to do to the K Frame? I've been thinking about the same pan for my 64 Barracuda.
I ordered the 6 qt pan, with all the built in stuff. They have an okay picture of it on their site at kevko.net, the pickup is also pictured there, but only one angle.
Eric