Kick Down throttle bracket

-
Status
Not open for further replies.
I have the bracket on my 69 318 dart. I will take pics and send to your email not sure if they are the same or not but worth the shot. I will be unable to get the pic until tomorrow afternoon. so expect it then.
 
I have several but not sure what they all came off of. Could you describe or post a pic of the one that you need?
 

physixx said:
I'm helping Steve with his project and here is an ebay link to a repro part.

http://cgi.ebay.com/ebaymotors/ws/e...m=170158502537&ssPageName=STRK:MEWA:IT&ih=007

We're doing a Formula S clone on the engine to give this fish a little more power and was hoping that someone might have one for less than the ebay prices.

Ken
Edison, NJ
Click to expand...

That one isn't correct, if you're using stock single-plane 4bbl intake. It puts the throttle cable too high compared to the carb throttle linkage.

Here's the correct one for '67...

273-4KickdownSmall.jpg
 
You're right and I realized that, but we're using the Edelbrock AFB thunder series carb and spaced it up a little so I'm hoping that it'll be close. If we have to do a little modification, that wouldn't be any big deal either, but the basic positons would be right for everything else. We actually got a bracket from ebay yesterday for cheap money. I actually used your pic from another thread last week to help me set the rest of the kickdown linkage up and make sure that we had everything so thanks for posting it.

This is a driver car and we're not looking for perfection. We chose the Edelbrock carb because it's new and easily tunable. Plus it kind of looks neat sitting on top of the manifold, all chromed, polished and shiny. LOL

Ken
 
Status
Not open for further replies.
-
Back
Top Bottom