Leaf Spring Front Hanger Bracket

[Valman]

Hey guys,

Does anyone know what difference in rear ride height you get by flipping the front leaf spring bracket upside down?
Approximately? Cheers..

 

[dadsbee]

You can't flip them over... Bolt spread is different!

 

[Valman]

You can't flip them over... Bolt spread is different!

Sorry, should’ve been more specific. Turn the bracket a round and relocate the holes/studs to suit. I’ve heard people have done this mod in the past.

 

[crackedback]

It will lower it about 1-1.5"

You have to modify the perch mount holes in your chassis to do it

 

[abodyjoe]

if i remember its like 1" for every 2" you raise the hole.

 

[Valman]

if i remember its like 1" for every 2" you raise the hole.

Ok, thanks. Maybe a better idea to make another set of brackets with two sets of holes. Standard and 1’’ drop, for example.

 

[Dana67Dart]

Keep in mind that if you do this it changes the pinion angle.

 

[el5dart]

hotchkis sells them. about an inch

 

[abodyjoe]

Mancini Racing Spring Hanger Set

 

[Valman]

hotchkis sells them. about an incha quick search, a few vendors do sell them

Looks like PST has them as well.

 

[el5dart]

ar103 part number ar engineering. mancini racing is the dealer

 

[el5dart]

i think its an 1 1/4 drop

A-body | AR Engineering

 

[Valman]

ar103 part number ar engineering. mancini racing is the dealer

Mancini says about a 1’’ drop, it depends on the spring arch, number of leaves etc of course

 

[340six]

ar103 part number ar engineering. mancini racing is the dealer

Andy F makes great stuff