Mad Dart
Nothing to see Here!
I was wondering if anybody knows what SBM H Beam Rod is the lightest?
Scat, Eagle, K1, Cat................ ??
Thanks!
Steel only?
this is not the guy..but these are the same rods...
http://cgi.ebay.com/ebaymotors/H-be...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
made in china....so dont get your panties in a wad.......
These are the rods & pistons i'll be using for my 318/390 engine.
I haven't weighed them to see what they are......sorry.
This would be for an LA 360CI running around 10-15lbs of boost. 8.5:1 Compression all forged internals possible Partial hard block, girdle, RHS HEADS, Blow thru Carb or EFI with Water/Meth injection instead of and intercooler. Water/meth would kick at boost over 5lbs or so. I have heard of guys running it with great success.
800/850hp at the crank at full boost. 700 or so to the tires.
How tight do you wind it up? What crank are you running? Lastly, did you have them checked?
this is not the guy..but these are the same rods...
http://cgi.ebay.com/ebaymotors/H-be...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
made in china....so dont get your panties in a wad.......
you dont want a lightweight rod for a turbo engineI was wondering if anybody knows what SBM H Beam Rod is the lightest?
This would be for an LA 360CI running around 10-15lbs of boost. 8.5:1 Compression all forged internals possible Partial hard block, girdle, RHS HEADS, Blow thru Carb or EFI with Water/Meth injection instead of and intercooler. Water/meth would kick at boost over 5lbs or so. I have heard of guys running it with great success.
800/850hp at the crank at full boost. 700 or so to the tires.
Uh Ohhhhhhhhh, I just started some crap I can hear it already!
As Tony said guy's don't get you panties in a wad! here we go...............haaaaaaaaaaa
Just skip the water/meth and go with E85. When using water/meth you are just adding another part to potentially break and take out the engine.
=white trash;] you dont want a lightweight rod for a turbo engine
my scat I beams weighted in a 595.....