Lowering Help!!!!

[Mrkidd]

hi i have 1969 dart and i would like to lower it alittle in the front and back to give it better handlng and i like the look i dont want to slammed to the floor but maybe a few inches in the front and back ...is there A kit out there ....what could buy to do this or wats needed
thanks fo:cheers:r your help

 

[highwayhooligan]

http://www.performancesuspension.com/index.php?cPath=1_4593_4771_4779

 

[66340SEDAN]

You could put some lowering blocks in the rear between the rear springs and housing, then crank down the torsion bars in the front and get it alingned. I will be doing this in the spring to my 73 Fury Wagon!

 

[Mrkidd]

You could put some lowering blocks in the rear between the rear springs and housing, then crank down the torsion bars in the front and get it alingned. I will be doing this in the spring to my 73 Fury Wagon!

How much of a drop will cranking down the torsion bars give me....?

 

[66340SEDAN]

from a hair to a few inches, go too low and you start messing with the geometry of the front suspension, you will need to align it when you are done. I would think 2 inches would be easy and safe.