cookietruck
Well-Known Member
LOL, tell me again why i can't just stab it in dot to dot...
Who says you can't? Nobody ever said that.LOL, tell me again why i can't just stab it in dot to dot...
This is why they invented blood pressure meds...Who says you can't? Nobody ever said that.
Do what you want. You're going to anyway.
Yup.This is why they invented blood pressure meds...
And why you end up hearing comments like "Mopars suck- I sunk *** grand into one and it still ran like crap"...
I won't. lol did it many times back in the day.LOL, tell me again why i can't just stab it in dot to dot...
What engine are you putting this in?, I built a 360 with that cam and it's a beast.
You are speaking to a brick wall sir. I commend you for doing so.One more time......
Dot to dot is not straight up....it is only dot-to dot. It is not necessarily straight up or advanced or retarded.....it is simply dot-to-dot.
Straight up is 110 degree ICL on a 110 degree LSA.
6 degrees advanced is 104 ICL on a 110 lobe separation. It may work out that way dot-to-dot and it may very well not. It is like most everyone has said, that is why you time/degree your camshaft.
Gettin a little worked up their RRR lol, he said he was going to degree it he just didn't know if the cam had the advance ground in and if he should start dot to dot, or in bad terminology "straight up".You are speaking to a brick wall sir. I commend you for doing so.
Worked up? Over somebody else's junk? Not hardly. I never saw where he said he was going to degree it......and I really don't care at this point. My car runs like Moody's goose.Gettin a little worked up their RRR lol, he said he was going to degree it he just didn't know if the cam had the advance ground in and if he should start dot to dot, or in bad terminology "straight up".
Post #11, just given you a ribbing, it was a pile on even without you lol.Worked up? Over somebody else's junk? Not hardly. I never saw where he said he was going to degree it......and I really don't care at this point. My car runs like Moody's goose.
Gettin a little worked up their RRR lol, he said he was going to degree it he just didn't know if the cam had the advance ground in and if he should start dot to dot, or in bad terminology "straight up".
Dude calm down, he didn't ask how to degree the cam, he asked a simple question of where to install the cam for a starting point related to if it has the advance ground in, he also stated he was going to degree the cam, good lord.If he is going to degree the cam in, he will have all the answers to his questions ! He has been told repeatedly on how to do this ! And it doesn’t matter if you call it straight up, straight back or peanut butter ! Call it what you want ! And it doesn’t matter where you put your timing set !! If you degree the cam in you still will have to move it most likely to get the ICL to 104 ! So all of it really doesn’t matter ! Degree the cam in and make your adjustment to get the desired ICL 104 ! It’s that simple
Dude, if he will degree the cam, his question will be answered ! What's not to understand OMG !Dude calm down, he didn't ask how to degree the cam, he asked a simple question of where to install the cam for a starting point related to if it has the advance ground in, he also stated he was going to degree the cam, good lord.
LOL, ok, keep yellinDude, if he will degree the cam, his question will be answered ! What's not to understand OMG !
Yep and if he has to move it using the multi key crank sprocket, it will likely be close enough, not exact.If he is going to degree the cam in, he will have all the answers to his questions ! He has been told repeatedly on how to do this ! And it doesn’t matter if you call it straight up, straight back or peanut butter ! Call it what you want ! And it doesn’t matter where you put your timing set !! If you degree the cam in you still will have to move it most likely to get the ICL to 104 ! So all of it really doesn’t matter ! Degree the cam in and make your adjustment to get the desired ICL 104 ! It’s that simple
You actually have a good point there LOL !!!LOL, ok, keep yellin
Rmoore isn't yelling! He just doesn't know about PERIODS! This kind I mean, (.) !!!!!LOL, ok, keep yellin
That's not a period. That's one boob. They come in pairs.Rmoore isn't yelling! He just doesn't know about PERIODS! This kind I mean, (.) !!!!!
Yeah , what he said !!!!!!!!!!! Me too Rusty !!!!!!!Rmoore isn't yelling! He just doesn't know about PERIODS! This kind I mean, (.) !!!!!
I've had a solid roller cam from their Voodoo series since March. I'm done with them. Poor communication, and no updates on my order. I'm looking for a big solid roller cam and lifters. Not to hijack the thread, but looking for advice from the members on this site.