[WANTED] Magnum Dual Plane Intake

[RAMVAN96]

Looking for a dual plane intake for a 5.2/5.9 Magnum. Preferably a MOPAR M1, but let me know what you have.

 

[abdywgn]

Professional Products 55026: Crosswind Intake Manifold 1500-6500 RPM Range | JEGS

 

[RAMVAN96]

Professional Products 55026: Crosswind Intake Manifold 1500-6500 RPM Range | JEGS

Guess I should have put in the ad, I'm running stock serpentine setup so the thermostat housing needs to be in the OE offset location.

 

[mderoy340]

FYI the M1 I had and sold off a 300hp Magnum crate motor was not off set. I hope this helps.

 

[jos51700]

Maybe a dumb question, but are you running EFI or carb?

 

[RAMVAN96]

Maybe a dumb question, but are you running EFI or carb?

Have decided to go carb for the time being. Someday I may switch to an efi setup.

Need an intake with the offset thermostat because I'm keeping the serpentine system on the engine. A centered thermostat won't work as far as I know.

 

[jos51700]

The carb m1 has been more scarce than the efi m1. Are you running a/c?

 

[Commando66]

My extra has the thermostat centered

 

[abdywgn]

doesn't the Edelbrock Magnum engine have the offset thermostat?

 

[mderoy340]

doesn't the Edelbrock Magnum engine have the offset thermostat?

Yes
Edelbrock Performer RPM Air-Gap Intake Manifolds 7577