measuring pushrod help

-
Slappy

Slappy

Well-Known Member
Joined
Sep 18, 2008
Messages
2,244
Reaction score
97
Location
Tampa Fla.
Thanks ahead of time. I am trying to find out where I can get a tool to measure for my pushrod length. I have a tool but it is for a ball type tip push rod. My pushrods will be dished so the tool wont work. Does anyone have a tool like this? Can you take a picture? Thanks.
 
the summit tool will not work. It needs to be a dish type end not a ball type. Thanks though for the advise.
 
The description on Summit's site says it has "cup tip" Is that not the same as "dish tip"?
 
I picked mine up from Jeg's. Measure your old pushrods to get a good length range.

Try this... http://www.jegs.com/i/JEGS+Performance+Products/555/80681/10002/-1 or this... http://www.jegs.com/i/JEGS+Performance+Products/555/80680/10002/-1
[FONT=verdana,geneva][FONT=verdana,geneva]
[/FONT][/FONT]
053109-Smith_Bros_Data-5.JPG
 
Thanks for the help guys!here are the part #s I ordered from summit. 7711-1 and 7719-1
 
Couldn't you use the tool you have, measure with an appropiate sized ball bearing in the cup then subtract the ball bearing size? ...just a thought is all
 
You must log in or register to reply here.
-

Back
Top