famous bob
mopar misfit
Any one got any measurements or plans to rework an A body k frame to clear a real oil pan (9 qt. milodon) , like the S/S AHR guys are running ?
no thanks , allready have the complete form. S front end ---------------
no thanks , allready have the complete form. S front end ---------------
I wont buy anything I can make .
Do you want to buy one already done? I have an extra A body race car K frame that I was going to take to the swap meet this summer.Any one got any measurements or plans to rework an A body k frame to clear a real oil pan (9 qt. milodon) , like the S/S AHR guys are running ?
Do you want to buy one already done? I have an extra A body race car K frame that I was going to take to the swap meet this summer.
View attachment 1715566219 View attachment 1715566220
No angle iron, there is a piece of 2x3 inch tubing that is welded into the K frame to box it together. The 2x3 tubing is very strong and not too heavy. You can put a jack under the tubing and lift the front of the car. I was going to ask $200 at the swap meet.Is that apiece of angle iron used on it in the last pic ?
What are u asking for it ? Not bad mouthing , but it doesnt look as strong as Jims did .-------------????
That would be strong , why didnt u use it ?No angle iron, there is a piece of 2x3 inch tubing that is welded into the K frame to box it together. The 2x3 tubing is very strong and not too heavy. You can put a jack under the tubing and lift the front of the car. I was going to ask $200 at the swap meet.
It is the K frame that was in my Duster when I bought it. I switched to a spool mount K frame.