Mini starter terminal block

[DartGTDan]

I've got a mini starter (Chrysler part #56027702AC) that I plan to give to my buddy for his 512 build. The problem is it has only 1 stud/lug (for the battery feed) and the other is a molded in connector. I seem to recall that there is a kit to remove that molded in connector and replace it with a stud/lug. Does anyone know of that kit? Manufacturer? Part #?

Thanks for any guidance!

Pics of what I have:

 

[George Jets]

☆☆☆☆☆

 

[66fyssh]

I haven't heard of any kits to convert the newer plug style to the older style stud type.

Your buddy could grab a connector from a junk yard and splice it into the solenoid wire.

 

[318willrun]

Mopar Sam

 

[Mattax]

Bottom of the page

DENSO STARTER PARTS

www.aspwholesale.com

 

[Kendog 170]

Are you looking for this?
Pardon Our Interruption...

 

[DartGTDan]

Bottom of the page

http://[URL]https://www.aspwholesale.com/index.php?route=product/category&path=357_457

[/URL]

Didn't see anything that would accomplish the idea, so I contacted them. They replied saying no such animal exists. We'll have to order up the harness side connector/terminal/seal and add it all to his car's harness.

Thanks Mattax!

 

[Mattax]

Really?
You unbolt the current terminal block with the plug in and install one of these.

Terminal Block

Denso 1.4kW OSGR Starters

www.aspwholesale.com

They used have more varieties.

 

[Mattax]

You see this thread? More pictures and links in there

Question about Dodge mini-starter installation in small block Plymouth

I just replaced the starter in a 1967 Barracuda with a '71 340 motor. Wasn't easy because I had to drop the driver side header and that was a real PITA. Car started great for a week. Then the ol' click on key turn returned. After another round of diagnosing, I found that the problem seems to be...

www.forabodiesonly.com

Hopefully you'll see a setup that will work for the situation