Mopar Big Block Engines-OR

-
Status
Not open for further replies.
J

jeeper

Well-Known Member
Joined
Jul 13, 2005
Messages
1,076
Reaction score
32
Location
Klamath County, Oregon
Rating - 0%
0   0   0
Contact seller
Getting out of Mopars, unfortunately. I have known for a long time that I should, but now it IS time. The following parts list is what I have for big blocks. I may have some extra pieces on hand, but this is what I recall.

76 400 long block with a truck pan-good builder/maybe runner.
77 400 long block with a truck pan-was a good runner, heads off to see.

Performance parts on hand for this price:
Factory square bore 4-barrel intake
Hughes Cam-3 bolt, 223-230 @.50-Ran for one hour
452 heads, bowl-ported, springs / retainers / seals/keepers new. Clearance for .530 lift cam-Ran for one hour
Comp Cams roller timing chain-ran for one hour
Comp Cams roller timing chain-missing cam gear / new
New keepers
New cam bearings

Other parts on hand:
One car pan, several truck pans
Multiple pulleys / water pumps/water pump housings
Valve covers
Misc. brackets etc.
440 pushrods

Price: $550 firm for all of this. Must have cash, not real interested in selling things individually.

Shipping: Not an option

Delivery: Possible delivery to Portland / other parts of Oregon in the next couple of weeks for reasonable expenses.

Location: Near Klamath Falls, OR
 
jeeper said:
Getting out of Mopars, unfortunately. I have known for a long time that I should, but now it IS time. The following parts list is what I have for big blocks. I may have some extra pieces on hand, but this is what I recall.

76 400 long block with a truck pan-good builder/maybe runner.
77 400 long block with a truck pan-was a good runner, heads off to see.

Performance parts on hand for this price:
Factory square bore 4-barrel intake
Hughes Cam-3 bolt, 223-230 @.50-Ran for one hour
452 heads, bowl-ported, springs / retainers / seals/keepers new. Clearance for .530 lift cam-Ran for one hour
Comp Cams roller timing chain-ran for one hour
Comp Cams roller timing chain-missing cam gear / new
New keepers
New cam bearings

Other parts on hand:
One car pan, several truck pans
Multiple pulleys / water pumps/water pump housings
Valve covers
Misc. brackets etc.
440 pushrods

Price: $550 firm for all of this. Must have cash, not real interested in selling things individually.

Shipping: Not an option

Delivery: Possible delivery to Portland / other parts of Oregon in the next couple of weeks for reasonable expenses.

Location: Near Klamath Falls, OR
Click to expand...

I`d sure like to have a big block single crank pulley if u got one !! bob:-\"
 
Damn...lol. Good deal on that stuff but I'm as far as I can get from you...
 
I think the price is pretty reasonable. It kinda makes me sick to get rid of it. I live in 4x4 country and I have known for a long time that 10 Mopars don't make sense.

Almost all of my BB stuff is from 72-77 truck and car engines. I really doubt I have any single pulleys.

I have stored the parts inside my wife's greenhouse, and you know what time of the year it is......
 
I have the heads, cam and timing chains tentatively sold. LMK if you want anything else delivered to Portland this Thursday.

Thanks, ROB
 
Heads, cam and lifters and timing chain are sold.

The rest is up for sale.

$375 for what is left, happy to deliver if needed and close enough obviously.
 
I will be in the Bend area on 4-10 through 4-12 this week if you want any of it. PM me an email and I will get right back with you.
 
Status
Not open for further replies.
-

Back
Top