mopar offset cam key package

[o1heavy]

how are you guys degreeing your camshafts
the mopar offset cam key package has been discontinued
(i'am sure there's other options i just don't know them)


not having any luck finding any
thanks

 

[Guitar Jones]

I had several sets of them and that's what I used. I wasn't happy with the 9 key way Cloyes crank gear. PITA to keep taking the degree wheel off, finding TDC again and then rechecking. Have you looked at places like Mancinni, fleabay, etc for left over kits?

 

[Guitar Jones]

Here's a couple places that seem to have them. Plus a dealer can run the number and see if any other dealer in the country has them.

http://www.jimsautoparts.com/mopar_performance_camshaft.htm

http://www.marketworks.com/StoreFro...etail.aspx?sid=1&sfid=92390&c=59158&i=9271121

 

[o1heavy]

gona try the links
but i have called the dealer and had them run the number and was told nobody had them on the self but the i think the parts guys was like 15 years old and not very interested in puting any effort

thanks for the links

 

[moper]

Mr Gasket 4°: http://www.summitracing.com/parts/MRG-988G
Plus you can get offset crank keys. Between the multi-key timing sets and that 4° deal, I don;t think you'll need anything else.

 

[67Dart273]

Mr Gasket 4°: http://www.summitracing.com/parts/MRG-988G
Plus you can get offset crank keys. Between the multi-key timing sets and that 4° deal, I don;t think you'll need anything else.

Maybe I'm missing something. If you click "check application" the only Mopars they seem to fit are the old 354/ 392?

 

[moper]

Sorry, I got the number off Summit... Here's the right number off the Mr G site:

http://store.prestoliteperformance.com/mr-gasket/engine-components/offset-cam-key-chrysler.html

 

[AdamR]

Hughes has 2* and 4*

http://www.hughesengines.com/Index/...W50&searchmode=partnumber&page=2&partid=26065