[SOLD] Mopar Performance solid cam kit

-
Status
Not open for further replies.
C

coloradohill

Well-Known Member
Joined
Oct 30, 2015
Messages
900
Reaction score
1,078
Location
Northern Colorado
Rating - 100%
36   0   0
Contact seller
I have a NIB small block Mopar Performance solid lifter cam and lifters kit for sale.
Purple shaft P/N P4529973
Specs are in the photos.
Asking 425 shipped in cont. U.S. from 80534. Will ship outside the U.S. for difference of actual shipping cost.

IMG_9388.png


IMG_8643.jpeg


IMG_8645.jpeg


IMG_8646.jpeg
 
Last edited:
Tempting… but what kind of compression and heads would this require? Trick flows be okay? 10:1 or more?

4 speed with 3.90 gears be okay? Or more?
 
mopardude318 said:
Tempting… but what kind of compression and heads would this require? Trick flows be okay? 10:1 or more?

4 speed with 3.90 gears be okay? Or more?
Click to expand...
The trick flows with 10:1 would be fine especially with a 4 speed
and 3.91 or more. I always used the Oval Track Cams because they
had a closer lobe center providing significantly more midrange torque
at only the expense of a bit less vacuum at low RPMs.
Now most of the Cam Manufactures have caught up and closed their
lobe centers.
Back then I could not convince Mopar Perf. hence I used Oval Track
cams exclusively and very seldom lost a Street Race (How I made my living).
 
coloradohill said:
I bought this from GTXJohn several years ago and decided to go with a roller.
Click to expand...
I bought the same kit from him also probably around the same time / it's seasoning like a bottle of fine wine !
One thing for sure that USA grind will never be offered again because the Chrysler we
Knew is gone.
 
Status
Not open for further replies.
-

Back
Top