Mopar Performance valve covers

[zac_F71]

Hey guys I'm looking to get a set of PRW 1.6 full roller rockers for my 383 build, I'm running the typical cast aluminum Mopar Performance valve covers, and wondering if the rockers will clear the covers?

 

[IQ52]

They clear Harland Sharp, T&D, 440 Source, Crane, Hughes, Mancini Racing & Comp Cams. I think your chances are really good.

 

[zac_F71]

Nice I wasn't sure with the baffles and stock height of them.. thanks!

 

[rumblefish360]

They clear Harland Sharp, T&D, 440 Source, Crane, Hughes, Mancini Racing & Comp Cams. I think your chances are really good.

Now wait a minute! Are we taking bets and what the odds cause I want in on the action!
LMAO
:violent1:

 

[zac_F71]

Ok after a short talk I'm looking at PRW stainless 1.7's I have a Comp 231* @.050" .480" lift - so the 1.6 should be .512" and the 1.7 should be .544" lift

 

[hangn0ut]

Height wise just run a thick valve cover gasket.

 

[zac_F71]

Ya I have rubber gaskets - I backed out on the PRW's and scored a set of Crane aluminum Gold 1.6's for $360 shipped on ebay

 

[roccodart440]

In regards to gaskets felpro make s a premium gasket that is a hard black material and is thick. I have gotten 3 years out of this set. I'm very impressed.