my project 66

[joshl06]

It's going to be a huge project but it has a lot of potential it has a brand new 9 inch with 4 link rebuilt 360 bored and stroked to 415 inches hasn't been started yet newly built 904 with a shift kit 3.89 possi rack and pinion steering disc brakes

 

[cosgig]

WOW!!! That's some beast of a setup!! I can't wait to see this when its done! Looking forward to following along! Geof

 

[pettybludart]

wow!!! That's some beast of a setup!! I can't wait to see this when its done! Looking forward to following along! Geof

x2

 

[joshl06]

I'm pretty sure the 3.89 gears are going to be to high for the 18.5×29 s

 

[pettybludart]

I'm pretty sure the 3.89 gears are going to be to high for the 18.5×29 s

I run 4.30 gear with 12X29 slicks....1/4 mile crossing the stripe at 6500rpm

 

[joshl06]

What are you running

 

[toolmanmike]

Looks like a fun build. Subscribed! Thinking about back halving your Dart Scott?

 

[joshl06]

got my 4-link brackets welded , transmission mount modified and started mocking up my engine mount since my engine and trans has been moved back 5" and has a after market crossmember

 

[joshl06]

Starting on the engine it's a 360 bored. 060 has a scat 408 forged rotating assembly dished pistons magnum eq iron ram heads 262 cam 470 lift 1.6 roller rockers I figured the compression to be 8.7 I didn't biuld the engine I recieved it this way being such low compression I'm going to attempt the dreaded twin turbo setup I already have the t3-t04 turbos I'm going to have the heads ported and change the cam to a 507 lift cam any advice would be appreciated not looking for specific hp numbers just want it to be streetable even kicking around running e85

 

[Keith Mopar]

Man awesome build , I'm subscribed.
Can't wait for you to hit the road.