My search for a shorty D100 is over

[TT5.9mag]

I have a C body housing at home. I can measure in the next few days. If correct width, I can throw in the truck and give it to out at Bonneville. I know thats not for a while, but still.

And a truck D60

That would be awesome. I’m going to baby the 8-1/4 as long as I can but I really can’t see it living a long happy life in a 3600lb truck on drag radials.

 

[nutz]

All most think if your doing a swap
Dana 60 time

 

[TT5.9mag]

All most think if your doing a swap
Dana 60 time

Na it’s not that fast or powerful. If I do anything other than an 8-3/4 it’ll be a 9” ford.

 

[71GSSDemon]

That would be awesome. I’m going to baby the 8-1/4 as long as I can but I really can’t see it living a long happy life in a 3600lb truck on drag radials.

I think it is backing plate to backing plate measurement Id need. And spring perch width. Sorry, lots of drugs right now post op

 

[TT5.9mag]

I think it is backing plate to backing plate measurement Id need. And spring perch width. Sorry, lots of drugs right now post op

Don’t worry too much about it. Concentrate on recovery. We can talk about rear ends later.

 

[nutz]

I can check my 67 and post #s if you want
No bed yet so easy to get

 

[TT5.9mag]

Had a little time mid day and ran home to work on the truck. I wired up the nos controller to function as a WOT switch and tested it. Works great. Loaded up two blue bottles, bottle heater and put together a tool box with carb parts and n20 jets. I think I’m about ready. Saftey gear, tools, extra parts, and an easy up. Let’s go racing.