Need help with duster door glass.

[BigStrok3]

Wondering how exactly these come off the glass. Need to remove them from the old one to install on a new glass. Tried turning the washer on top with the 2 holes and nothing will budge. Thanks!

 

[kybatman]

guy at the shop i hang out at has small bar with 2 pegs on it. pegs go on the holes and the turn counter to loosen and clockwise to tighten.

Bruce

 

[kybatman]

and lots of PB Blaster!!!



Bruce

 

[mullinax95]

Yeah a special tool is needed that Bruce mentioned to remove them .... easier.

 

[zkx14]

I just used a needle nose pliers in the holes

 

[BigStrok3]

I tried the needle nose pliers and couldn't get them to budge. I just went out tonight and got some PB blaster to try on them. If I have to I can make a tool with a couple studs in it to fit the holes.

 

[kybatman]

you can use the keylock for a makita 4" grinder for switching the disks.



Bruce

 

[kybatman]

Here you go.

Metal Grinder 100 Flange Lock Nut & Spanner for Dewalt Milwaukee Makita Black | eBay



Bruce

 

[340doc]

you can use the keylock for a makita 4" grinder for switching the disks.



Bruce

^^^^^^ This is right on. I found this out when I was changing a door glass. The one off my cheapo angle grinder looked different but worked great.

 

[Moparparts]

Get an adjustable and multi size spanner wrench