Need input on my stroker head, cam, manifold and oiling

-
Gutiar jones has me talked into a r3 block. Now which 59 deg. block? Want a roller cam and rockers though. What are my options
 
VIZ said:
Gutiar jones has me talked into a r3 block. Now which 59 deg. block? Want a roller cam and rockers though. What are my options
Click to expand...

tall deck, siamesed bore, 340 main. I sell them already clearanced from Indy for roller lifters.
 
I received my flow# results from Tom's Performance in vancuver wash. for my B1BA's 298cfm at .600 in. 280cfm all the way to .700 these are the numbers I remember over the phone have not received the email yet from them pretty sure I remembered all of that. Truthfully I was hoping for more than this. This is not including the manifold btw. The flow co. wanted almost 1000.00 to flow this manifold/head combo. Also cam motion came back with 259/263 dur 684/684 110 lobe seperation 106 intake centerline. And I will run the holley 650HP's. I went with the cro'd huges 1.6 roller rockers. their solid roller lifters also. Pistons are prob flat tops, final compression will be 12.1. The bottom end I went with the 4 program main caps and a girdle.
Those were a few of the last things I was up in the air on. what do guys think?
 
You must log in or register to reply here.
-

Back
Top