I can't imagine it working with a center sump pan cause the oil pump cover just barely clears the pan. Rear sump no problem,
I'm getting ready to buy a Kevko pan and pick up. Can you tell me the advantages of running the pick up shown above vs. running the one they've been selling all along? Thanks!
Brian
They say, one of the biggest restriction, in the SB Mopar oil system, is the pick-up tube diameter.
No matter how large you make the pick-up tube, you are still restricted by the thread size in the pump.
When it's bolted to the pump cover,....well your restricted to the side of the pump rotor its self.
That's the pickup, gold one, you are going to get if you buy the pan that works in a std car application.
This makes sense.
That's correct. I'm buying the M302 pan which is five quarts in the pan with a stock K member.
So is the new pickup above not available?!?
Don't know, still have not received a response from them.
there probably 9-5, 5 day a week. Suspect i will get an answer on Monday
Any time I called Kevko was during normal hours, tech guy got on the phone, no voice mail or call back needed.
They were very helpful when I was building my 408. I used the rear sump pan with their pick up. They even offered to make the setup to my specification if needed to fit TTI 1 7/8" headers.
Fishy do you have a part number for that pickup? I only see one listed on their website.