New PB woohoo!!!!!!

-

purpleheart0189

Well-Known Member
Joined
May 5, 2015
Messages
82
Reaction score
24
Location
Beaumont, ca
Car ran real good check out my old slips compared to my new ones
Only change was CSU built carb and that's it tranny still slipping .
 

Attachments

Car ran real good check out my old slips compared to my new ones
Only change was CSU built carb and that's it tranny still slipping .

Woo-hoo ! ! For ya!
Now I wish I could blow that up in a way that didn't diatort it and I could actually read the Time Slips :protest:
 
That is a nice ET/MPH combo, your chassis works pretty good!
 

That is a nice ET/MPH combo, your chassis works pretty good!

Yes it hooks way too hard lol
And bet u won't believe it's on ss springs and a snubber but according to the forums they "don't work" and that's not even with a good converter either my 8inch is in its way
 
Idk how to make it better lol

Went from 11.60 112mph

To 11.2x. 117 mph
can you also type out the 60 foot times and stuff ? Again I can't seem to read the pictures. I've had 117 mile an hour,but I'm working more on my 60 foot time to get to the 11.2 that I should be like you've achieved and again good job
 
Car leaves strong. 10.85ish et 60' time

It's losing a bit along the way, did you try jetting it up?
 
Car leaves strong. 10.85ish et 60' time

It's losing a bit along the way, did you try jetting it up?
Up in the top of second gear and in high gear u can feel my trans slipping of its blowing thru the converoter
And my carb builder which is one of the nations best CsU Kevin said do t touch it until we get a lot of data and he said he will help me dial it in at the track. He is top notch and is a good guy.

So now trans is coming out gonna get a refresh , and I have a lupo 8 inch on the way
 
-
Back
Top Bottom