[SOLD] New Premium 500 RB Stroker $7,820 Invested $4,950.

-
Status
Not open for further replies.

GTX JOHN

FABO Gold Member
FABO Gold Member
Joined
Dec 12, 2009
Messages
2,819
Reaction score
3,538
Location
Boulder City NV.
Rating - 100%
72   0   0
Contact seller
Brand New 500 Stroker
Top quality Parts throughout.
Built by one of the country's top Mopar
Race engine builder (PM me for details)
and National Event/Divisional Champion
and good friend. I asked him to take his time and pretend money was No Object!

This is my identical spare engine for my Scamp that got to the finals in Pinks All Out and races for big money Including
destroying some of the vaulted Street Outlaws (On out Facebook0

4.150 Forged Crank
Ross Flat Top Pistons (.030)
Generous Valve reliefs (Will accept large roller)
Custom Ring package suitable for both street longetivity
and the Racetrack (Details upon request)
\
Internally balanced
Hot Tanked/Sonic Tested (6 Different Blocks and this was the best)
Acid Washed
Motor Bored with a Deck Plate and Hot water circulated
Align Hone checked and corrected as needed.
Block Squared and Zero Decked (Finished for Fel Pro 1009 or
Cometic gaskets depending on heads)

I have several core engines and I could include at no charge all
the tin: Pan Timing Cover Water Pump Alternator off one of those
engines on the deal!

Sadly, Age and Health have caught up on me and I have had to
sell the 8 Second (All Motor) Scamp to one of my Street Racers Buddys.

I have to go from Nevada to Missouri next week or two with an enclosed
trailer and can deliver it along the way. I can take I40 or I70 and go
a little way off the interstate (No Charge for Delivery)

$4,950.00

About 1/2 what I have invested (Not including all the blocks)



I am traveling from the West Coast

20220912_154738.jpg


20220912_154742.jpg


20220912_154748.jpg


20220912_154758.jpg


20220912_154803.jpg


20220912_154810.jpg


20220912_154814.jpg


20220912_154908.jpg


20220912_154723.jpg
 
Last edited:
So this is a '72 bare short block? No pan or any support accessories? (With the understanding one wants to select their own cam depending on head configuration for desired performance compression build.)

Still a VERY decent deal. The tough stuff done. The fun parts remain. Lol.
 
So this is a '72 bare short block? No pan or any support accessories? (With the understanding one wants to select their own cam depending on head configuration for desired performance compression build.)

Still a VERY decent deal. The tough stuff done. The fun parts remain. Lol.

I have a dozen core engines still in the shop so far.
I assumed probably incorrectly that someone would be replacing
another engine in their car ...

I would be happy to strip and include at no charge all the support stuff.
Timing Cover/ Pan/ Water Pump/ Distributor/Fuel Pump etc. = BUT I am not feeling
well enough to hot tank/paint/wire brush the parts so you would have to accept
them right off the engines maybe steamed cleaned but that is all!

Free Delivery between So Cal or Nevada to Missouri next couple weeks
as I have to make a trip.
 
Last edited:
Status
Not open for further replies.
-
Back
Top