Frost
Member
Does anyone have any information on the Mopar small block cylinder head part number P5153847?
P5153847 cylinder heads
- Thread starter Frost
- Start date
-
1968FormulaS340
Well-Known Member
Is that not the Edelbrock head done up for MoPar?
autoxcuda
Well-Known Member
- Joined
- Apr 6, 2007
- Messages
- 8,838
- Reaction score
- 3,793
One of those aluminum magnum heads has an exhaust port that is usually too tall or low (forgot which) for off the shelf headers. MP really screwed the pooch on that one. I think it's the Magnum Commando (or Super Commando) heads.
Do your research.
Do your research.
*I think*, key words, the Super Commando (only cast in "LA" form) has the port issue in some castings. The ports are not raised.
I'm going to get a set of those super commando's.
I'm going to get a set of those super commando's.
Frost
Member
Thanks
I am looking for a very good head for my street/strip car. I guess the RHS magnum style head is the best all around head for the money so far.
Stock 71 Demon
8.75 with 4.10 gearing
904
3000 Stall
P275 15s MT Street Radials
I have a 340 block O ringed
.030 over
looking to make 500 hp
I am looking for a very good head for my street/strip car. I guess the RHS magnum style head is the best all around head for the money so far.
Stock 71 Demon
8.75 with 4.10 gearing
904
3000 Stall
P275 15s MT Street Radials
I have a 340 block O ringed
.030 over
looking to make 500 hp
Both heads require work from there OOTB condition to get what your looking for. Do yourself a favor and contact OU812 for additional info on which head would suite your purposes best as well bang for the buck.
IMO, that particular MoPar head isn't worth it.
IMO, that particular MoPar head isn't worth it.
-
