parting 1968 barracuda fastback

-
Status
Not open for further replies.
B

barracudakid

FABO Gold Member
FABO Gold Member
Joined
Mar 12, 2009
Messages
7,565
Reaction score
1,106
Location
king nc
Rating - 99.3%
149   1   0
Contact seller
i am currently parting a 1968 plymouth barracuda fastback.
318 engine 904 transmission 8 1/4 rearend
bucket seat automatic console black interior
pm me
 
How much for all of the kickdown linkage from the carb. to the transmission (all components)?

How much on the bucket seats pair?

Where are you located?

I am in Georgia.

Thanks,
Chrisdcuda
 
i am in king nc 27021.
seats are rough.i have not pulled them.
i will price them when i get them out.
around 90.00 for kickdown carb stud to valve body.
thanks!
eddie
 
What do the quaters look like and does it have a center console, also do you have the wheel well trim ( molding) can I get pictures of these items and can I get a price.
 
the quarters look like 42 years old-rough!
decent console.
decent wheel well trim.
give me an email address for pictures.
pm me.
 
What condition is the hood in?

You can attach pictures to your post. Scroll down and click on manage attachments.
 
the hood has no outer damage.
no rust problems.
it has indicator holes.
give me an email address for pictures.
pm me.
 
How much for all the front windshield trim - complete set?
Daryl
 
the windshield trim is nice!
no major dents or scratches.
nice straight mounting flange.
 
it has a good power steering floor shift column.
i normally have fastback back glass trim but i only have 3 of the 4 pieces now.
should have some any time.
i will send pictures tomorrow.
 
barracudakid said:
no fender,trunk floor or door panels.
very nice 3 piece dash and a pillar trim.
Click to expand...


Can you send pics/price 0f 3 piece dash. Also do you have the left rear window glass (some lowlife just broke mine), got the radio and antenna (Patient theif) too. Let me know price and if you have on these items also

Thanks,

Ed
 
Do you have power steering pump brackets & pulley (Chrysler/Federal pump - has round body and round filler neck)?
 
The parts I need: on the rear seat, when you engage the seat folding lever, these two little cams, one on each side of the seat, turn and disengage the locking mechanism for the seat.

I need those two little cams. They have square holes in them to fit over the rod.
[email protected]
 
Are the front buckets available, if so what color?
 
Status
Not open for further replies.
-

Back
Top